10 Port BRI Card w/128ms HW EC

Producător: Sangoma
Cod produs: SANA500A505D
Disponibilitate: Stoc Furnizor
Preţ: 4.593,40 RON
Fără TVA: 3.860,00 RON
Descriere:Technical Specifications

From 2 to 24 ports are supported. Mix TE and NT modes, as required. Changing modes requires no jumpers — simply invert the colour-coded module
Support for Asterisk®, FreeSwitch™, and Yate as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
Single synchronous PCI and PCI Express interface for all 24 BRI interfaces
Six ports per Remora™ card
Dimensions: 2U Form factor: 187 mm x 55 mm for use in restricted chassis
Short 2U compatible mounting clips included for installation in 2U rackmount servers and high quality, tested 2 m 8-pin RJ45 port splitter cables included
32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
Autosense compatibility with 5 V and 3.3 V PCI busses
Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts
Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available
Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V
Temperature range: 0–50 °C
Optimized DMA stream and hardware-level HDLC handling unload the host CPU
Raw bitstream interfaces can be used to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
WANPIPE® supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25
Operating Systems

Linux (all versions, releases and distributions from 1.0 up)

Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy


FCC Part 15 Class A, FCC Part 68, CE, TBR3 atick

Diagnostic Tools

WANPIPEMON, SNMP, system logs

Production Quality

ISO 9002


The A500 consists of a Remora™ BRI daughtercard mounted on the AFT PCI card. The Remora™ BRI card has three sockets, each of which can accept an S/T BRI module

One S/T BRI module has two S/T four wire interfaces, which support TE or NT modes of operation. Changing modes requires no jumpers — simply invert the module

Up to three additional Remora™ daughter cards can be mounted in empty slot positions beside the A500 assembly. These are connected to the A500 by a special backplane bus connector
Garantie :12 Luni