Charger 2400VA, 24V DC, 30/7.5-amp

Producător: Tripp Lite
Cod produs: TLAPSINT2424
Disponibilitate: Stoc Furnizor
Preţ: 3.640,44 RON
Fără TVA: 3.059,19 RON
Descriere:PowerVerter APS INT 2400W 24VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired
Model Number: APSINT2424

24V DC or 230V AC input; 230V, 50 Hz output (hardwired)
2400 watts continuous, 3600 watts OverPower™ and 4800 watts DoubleBoost™ inverter output (see specifications)
3 stage, 30 amp selectable wet/dry cell battery charger
Auto Transfer Switching option for battery backup / UPS operation
Reliability enhanced large-transformer design with protected DC and AC wiring terminals

Style Heavy-duty with built-in battery charger
Frequency Compatibility 50 Hz
Output Receptacles Hardwire
Output (Watts) 2400
Continuous Output Capacity (Watts) 2400
Peak Output Capacity (Watts) 4800
Output Nominal Voltage 230V
Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads.
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service DC INPUT: Requires 24VDC input source capable of delivering 112A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended.
Maximum Input Amps / Watts DC INPUT: Full continuous load - 112A at 24VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage Compatibility (VAC) 230
Voltage Compatibility (VDC) 24
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC) 24
Battery Pack Accessory (Optional) 98-121 sealed lead acid battery (optional)
Battery Charge 30 amp
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Shipping Dimensions (hwd / in.) 13.5 x 15 x 21.5
Shipping Dimensions (hwd / cm) 34.29 x 38.1 x 54.61
Shipping Weight (lbs.) 42
Shipping Weight (kg) 19.5
Unit Dimensions (hwd / in.) 7.25 x 8.5 x 16.25
Unit Dimensions (hwd / cm) 18.42 x 21.59 x 41.28
Unit Weight (lbs.) 38.2
Unit Weight (kg) 17.3
Cooling Method Multi-speed fan
Material of Construction Polycarbonate
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Relative Humidity 0-95% non-condensing
Transfer Time (Line Power to Battery Mode) 20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual)
High Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to batte
Garantie :24 Luni