UPS 100kVA SmartOnline double-conversion

Producător: Tripp Lite
Cod produs: TLSU100KX2
Disponibilitate: Stoc Furnizor
Preţ: 148.742,28 RON
Fără TVA: 124.993,51 RON
Descriere:SmartOnline 100kVA Modular 3-Phase UPS System, On-line Double-Conversion International UPS
Model Number: SU100KX2

100kVA / 100,000VA / 80,000W on-line double-conversion 3 phase UPS
3 phase 220/380V, 230/400V, 240/415V 4-wire + ground wye input & output
Scalable design grows as your datacenter grows
Modular N+1 redundant architecture helps assure 100% availability
Parallel up to 4 UPS systems for redundancy or increased capacity
IGBT & DSP technology produce <4% input harmonic distiortion (THDi)
Hot swappable power modules, Expandable runtime

Output Capacity Details One open power module slot enables installation of up to one additional 20kVA power module for increased capacity to 120kVA (authorized technician required)
Output Volt Amp Capacity (VA) 100000
Output kVA Capacity (kVA) 100
Output Watt Capacity (Watts) 80000
Output kW Capacity (kW) 80
Power Factor 0.8
Crest Factor 3:1
Nominal Output Voltage(s) Supported 220/380V; 230/400V; 240/415V; 3-Phase Wye
Nominal Voltage Details Less than 3% output THD
Frequency Compatibility 50 / 60 Hz
Output Voltage Regulation (Line Mode) +/- 1%
Output Voltage Regulation (Battery Mode) +/- 1%
Output Receptacles Hardwire
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Rated input current (Maximum Load) 129A (220/380), 123A (230/400), 116A (240/415)
Nominal Input Voltage(s) Supported 220/380V (3ph wye); 230/400V (3ph wye); 240/415V (3ph wye)
Nominal Input Voltage Description 3-Phase Wye, 4 wire (L1, L2, L3, N, G); Less than 4% input harmonic distortion (THDi)
UPS Input Connection Type Hardwire
Input Phase 3-Phase
Expandable Battery Runtime Battery set sold separate
External Battery Pack Compatibility BP480V103 ; BP480V140 ; BP480V55 ; BP480V78 ; BP480V200 ; BP480V300 ; BP480V400 ; BP480V500
Expandable Runtime Description External battery pack wiring is contractor supplied
DC System Voltage (VDC) +/- 240VDC
Battery Replacement Description Hot-swappable, replaceable batteries
Voltage Regulation Description Online, double-conversion power conditioning
Overvoltage Correction Maintains continuous operation without using battery power during overvoltages to 276-477 (3-phase, 4-wire, wye), reducing output within 1% of nominal
Undervoltage Correction Maintains continuous operation without using battery power during brownout/undervoltage conditions to 173-300 (3-phase, 4-wire, wye)
Switches ON button turns UPS inverter on. OFF button turns UPS inverter off. LCD Display Control Buttons browse through and select items displayed on LCD screen. EPO (Emergency Power Off) button turns UPS output off and disables Bypass output
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Alarms signal a variety of operational conditions: low-battery, overload, shutdown, bypass and more
LED Indicators 4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions
UPS AC Suppression Joule Rating 5960
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
UPS Power Module Dimensions (hwd, in.) 66.8 x 20.5 x 38.4
UPS Power Module Dimensions (hwd, cm) 169.7 x 52.1 x 97.5
UPS Power Module Weight (lbs.) 766.4
UPS Power Module Weight (kg) 347.5
UPS Shipping Dimensions (hwd / in.) 76.1 x 28.5 x 48.2
UPS Shipping Dimensions (hwd / cm) 193.3 x 193.3 x 122.4
Shipping Weight (lbs.) 766.4
Shipping Weight (kg) 347.5
Cooling Method Fans
UPS Housing Material Steel
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 17400
Communications Interface DB9 Serial; Slot for SNMP/Web
Garantie :24 Luni